4V210-08 Pneumatic Solenoid Valve – 5/2-Way, Internal Pilot, 12 VDC / 24 VDC / 110 VAC / 220 VAC Coil

Description

Single-solenoid 5-port, 2-position directional valve in the common 4V210-08 size. It switches supply air between the two ports of a double-acting cylinder or pneumatic actuator, with spring return when the coil is de-energized. Sold as the valve only (no push-in fittings or mufflers).

Specifications (as listed by the supplier)

• Brand (on photos): HYMEL
• Model: 4V210-08
• Type: 5-port, 2-position, single solenoid
• Operation: internal pilot
• Fluid: air, gas (supplier listing)
• Operating pressure: 1.5-8 kgf/cm² (about 21-114 psi)
• Proof pressure: 1.5 MPa
• Coil voltage: DC 12 V, DC 24 V, AC 110 V or AC 220 V (options)
• Protection: IP65 (supplier listing)
• Temperature: 5-50 °C
• Body material: aluminum alloy

Typical uses in oil and gas

• Pilot valve for double-acting pneumatic actuators on quarter-turn ball and butterfly valves, driven by a PLC or RTU output
• Open/close control of air cylinders on skids, samplers and gates
• Spare for existing 4V210-08 manifolds in control panels

The coil is a standard industrial coil, not an explosion-proof design. Use clean, dry instrument air within the stated pressure range.

Not certified for hazardous (classified) locations; install in a suitable enclosure in a non-classified area. Please confirm ranges, voltages and wiring against your system before ordering. For volume pricing, use our wholesale quote form.