NUEVODiseña tu máquina gratis: lista completa de componentes en 2 minutos Empezar →Diseña tu máquina gratis → NEWDesign your machine for free: full component list in 2 minutes Start →Design your machine free →

CWT-SWD-A 8-Point Wind Direction Sensor | 4-20 mA, 0-5 V, 0-10 V or RS485, 10-30 VDC

$76.99

8-point wind direction sensor in an aluminum housing for wellsite H2S and flare wind monitoring. 10-30 VDC, ≤0.2 W, ±1°, output 4-20 mA, 0-5 V, 0-10 V or RS485 by model.

Request a quote / bulk pricing

Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.

SKU: ABX-AE-578886 Categories: ,
🛠️ ¿Necesitas la máquina completa?Diséñala gratis: elige tu máquina y recibe la lista de PLC, motores, sensores y seguridad. Diseñar gratis → 🛠️ Need the complete machine?Design it free: pick your machine and get the list of PLC, motors, sensors and safety parts. Design it free →
CWT-SWD-A 8-Point Wind Direction Sensor | 4-20 mA, 0-5 V, 0-10 V or RS485, 10-30 VDC
Technical specification sheet · automationbotx.com
SKUABX-AE-578886
Manufacturer part numberCWT-SWD-A
Model (options)CWT-SWD-A-8-I · CWT-SWD-A-8-S · CWT-SWD-A-8-V5 · CWT-SWD-A-8-V10
Choose the model for your input card4-20 mA, 0-5 V, 0-10 V or RS485.
BrandComWinTop
ModelCWT-SWD-A
Measured valueWind direction
HousingAluminum alloy
Supply10-30 VDC
Power consumption≤0.2 W
Range8 directions
Accuracy±1°
Response time≤0.8 s
Output4-20 mA, 0-5 V, 0-10 V or RS485 (by model)
Operating environment-20 to 60 °C, 0-80 %RH
Dimensions246 x 201.5 mm, base Ø79.8 mm
Weight0.7 kg

Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.

Ask about this product

Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.

We use your email only to answer this question.

Description

The CWT-SWD-A is an 8-point wind direction sensor with an aluminum alloy body and a flange base, built for permanent outdoor mounting. On oil and gas sites it gives the wind direction input that H2S and gas-detection plans, muster-point selection, flare and venting procedures and tank-top work permits depend on. It is the companion to the CWT-SWS-A wind speed sensor: together they give a PLC, RTU or panel both wind speed and wind direction.

Key points

  • 8-point direction indication with ±1° accuracy and ≤0.8 s response time, as listed by the supplier.
  • Wide 10-30 VDC supply and very low power (≤0.2 W), suitable for solar-powered wellsite RTUs.
  • Choose the model for your input card: 4-20 mA, 0-5 V, 0-10 V or RS485.
  • Flange base with a north alignment mark; 3-wire or 4-wire connection diagrams are shown in the photos.

Specifications (as listed by the supplier)

  • Brand: ComWinTop
  • Model: CWT-SWD-A
  • Measured value: Wind direction
  • Housing: Aluminum alloy
  • Supply: 10-30 VDC
  • Power consumption: ≤0.2 W
  • Range: 8 directions
  • Accuracy: ±1°
  • Response time: ≤0.8 s
  • Output: 4-20 mA, 0-5 V, 0-10 V or RS485 (by model)
  • Operating environment: -20 to 60 °C, 0-80 %RH
  • Dimensions: 246 x 201.5 mm, base Ø79.8 mm
  • Weight: 0.7 kg

Notes

  • Wind direction only (no wind speed); see the CWT-SWS-A wind speed sensor for that measurement.
  • Not rated for hazardous (classified) areas: mount it outside classified zones or follow your site rules. No third-party certification is included.
  • It is a monitoring input, not a safety device.
  • To log and trend the reading remotely in read-only mode, see AutomationBotX Cloud (free up to 10 machines).

Additional information

Model

CWT-SWD-A-8-I, CWT-SWD-A-8-S, CWT-SWD-A-8-V5, CWT-SWD-A-8-V10

Reviews

There are no reviews yet.

Be the first to review “CWT-SWD-A 8-Point Wind Direction Sensor | 4-20 mA, 0-5 V, 0-10 V or RS485, 10-30 VDC”

Your email address will not be published. Required fields are marked *