Dragino PS-LB LoRaWAN Liquid Level Sensor, Immersion Probe, US915, Battery-Powered
Price range: $286.99 through $351.99
Battery-powered LoRaWAN level sensor with stainless immersion probe (5-20 m cable), US915, 8500 mAh Li-SOCl2 battery, BLE setup. For tanks, pits and sumps without wiring.
Ships from our supplier's warehouse. International orders: shipping cost shown at checkout · Shipping policy
- ✓ Free tracked shipping in the USEnvío gratis con seguimiento en EE. UU.
- ✓ Secure checkout: PayPal or cardPago seguro: PayPal o tarjeta
- ✓ Buying in volume?¿Compras por volumen? Request a written quote →Pide una cotización por escrito →
Request a quote / bulk pricing
Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.
Technical specification sheet · automationbotx.com
| SKU | ABX-AE-204102 |
|---|---|
| Manufacturer part number | PS-LB |
| Probe cable (options) | 5 m cable · 10 m cable · 15 m cable · 20 m cable |
| Brand | Dragino |
| Model | PS-LB (immersion version) |
| Wireless | LoRaWAN |
| Frequency band | US915 |
| Probe type | Immersion, stainless |
| Probe cable | 5, 10, 15 or 20 m (select option) |
| Probe signal input | 0-20 mA, 0.02 mA accuracy |
| Voltage input | 0-30 V, 0.02 V accuracy |
| RX sensitivity | down to -139 dBm |
| Max RF output | +22 dBm |
| Battery | 8500 mAh Li-SOCl2 (non-rechargeable) |
| Battery life | up to 5 years (supplier figure) |
| Sleep current | 5 uA at 3.3 V |
| Operating temperature | -40 to 85 °C |
| MCU | 48 MHz ARM, 256 KB flash, 64 KB RAM |
| Configuration | BLE and wireless OTA update |
| Measuring range of the immersion probe | confirm the range for your tank depth before ordering. |
| Volume or project pricing | request a quote at automationbotx.com/wholesale. |
Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.
Ask about this product
Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.
Description
The Dragino PS-LB is a battery-powered LoRaWAN pressure and liquid level sensor. This version uses a stainless immersion probe on a cable: the probe sits at the bottom of a tank, pit or well and the node sends the reading over LoRaWAN to your network server, with no signal or power wiring back to a panel. It is configured over Bluetooth (BLE), supports wireless OTA updates and ships pre-loaded with unique LoRaWAN keys.
Typical uses in oil and gas facilities
- Level of water tanks, produced-water pits and sumps at sites with no power or conduit
- Remote level readings logged through a LoRaWAN gateway (such as the RAK WisGate Edge Lite 2 sold on this site)
- Temporary or seasonal monitoring points where trenching a 4-20 mA cable is not worth it
Specifications (as listed by the supplier)
- Brand: Dragino
- Model: PS-LB (immersion version)
- Wireless: LoRaWAN
- Frequency band: US915
- Probe type: Immersion, stainless
- Probe cable: 5, 10, 15 or 20 m (select option)
- Probe signal input: 0-20 mA, 0.02 mA accuracy
- Voltage input: 0-30 V, 0.02 V accuracy
- RX sensitivity: down to -139 dBm
- Max RF output: +22 dBm
- Battery: 8500 mAh Li-SOCl2 (non-rechargeable)
- Battery life: up to 5 years (supplier figure)
- Sleep current: 5 uA at 3.3 V
- Operating temperature: -40 to 85 °C
- MCU: 48 MHz ARM, 256 KB flash, 64 KB RAM
- Configuration: BLE and wireless OTA update
Notes
- Requires a LoRaWAN gateway and network server (not included). The US915 band is for the United States; ask before ordering for other countries.
- Battery life depends on the reporting interval and radio conditions.
- Measuring range of the immersion probe: confirm the range for your tank depth before ordering.
- No hazardous-area approval or certificate document is supplied. Install in non-classified locations.
Volume or project pricing: request a quote at automationbotx.com/wholesale.
Additional information
| Probe cable | 5 m cable, 10 m cable, 15 m cable, 20 m cable |
|---|









Reviews
There are no reviews yet.