NUEVODiseña tu máquina gratis: lista completa de componentes en 2 minutos Empezar →Diseña tu máquina gratis → NEWDesign your machine for free: full component list in 2 minutes Start →Design your machine free →

EARU MFR012 DIN-Rail Mechanical Hygrostat, 40-90 % RH, Cabinet Heater / Fan Humidity Control Switch

$28.99

DIN-rail mechanical hygrostat that switches an enclosure heater or fan above the set humidity (40-90 % RH): prevents condensation in control panels, 250 VAC 5 A changeover contact.

🚚 Free shipping to US addresses · Estimated delivery: 8–21 business days after payment (tracking number by email).
Ships from our supplier's warehouse. International orders: shipping cost shown at checkout · Shipping policy
Request a quote / bulk pricing

Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.

SKU: ABX-AE-969830 Categories: ,
EARU MFR012 DIN-Rail Mechanical Hygrostat, 40-90 % RH, Cabinet Heater / Fan Humidity Control Switch
Technical specification sheet · automationbotx.com
SKUABX-AE-969830
Manufacturer part numberMFR012
It needs no power supply of its ownthe changeover contact simply sits in series with the heater or fan circuit. The set point is adjusted with the front knob between 40 and 90 % RH (the supplier recommends acting at about 65 % RH).
BrandEARU
ModelMFR012
Typemechanical hygrostat (humidity switch)
Setting range40 to 90 % RH
Switching difference4 % RH (±3 % tolerance)
Contact typechangeover contact
Max. switching capacity250 VAC 5 (1) A, DC 20 W
Min. switching capacity20 V AC/DC, 100 mA
Contact resistancebelow 10 mΩ
Service lifeover 100,000 cycles
Permissible air velocity15 m/s
Connection3-pole terminal, 2.5 mm2 wire
Mounting35 mm DIN rail clip
Housingplastic, light grey
Dimensions67 x 50 x 38 mm
Operating temperature0 to +60 °C
Storage temperature-20 to +80 °C
ProtectionIP20

Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.

Ask about this product

Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.

We use your email only to answer this question.

Description

The EARU MFR012 is an electromechanical hygrostat that mounts on a 35 mm DIN rail inside control panels and switches an enclosure heater (or a ventilation fan) when relative humidity rises above the set point. Raising the cabinet temperature keeps the air above its dew point, which prevents condensation and corrosion on terminals, relays, PLCs and radios.

It needs no power supply of its own: the changeover contact simply sits in series with the heater or fan circuit. The set point is adjusted with the front knob between 40 and 90 % RH (the supplier recommends acting at about 65 % RH).

Typical uses in oil and gas

  • Anti-condensation control in RTU, PLC and radio cabinets at remote wellsites during winter
  • Motor control centers, VFD and pump-off controller panels exposed to humidity swings
  • Generator and ATS control panels
  • Pairing with a DIN-rail cabinet heater and a thermostat for complete enclosure climate control

Specifications (as listed by the supplier)

  • Brand: EARU
  • Model: MFR012
  • Type: mechanical hygrostat (humidity switch)
  • Setting range: 40 to 90 % RH
  • Switching difference: 4 % RH (±3 % tolerance)
  • Contact type: changeover contact
  • Max. switching capacity: 250 VAC 5 (1) A, DC 20 W
  • Min. switching capacity: 20 V AC/DC, 100 mA
  • Contact resistance: below 10 mΩ
  • Service life: over 100,000 cycles
  • Permissible air velocity: 15 m/s
  • Connection: 3-pole terminal, 2.5 mm2 wire
  • Mounting: 35 mm DIN rail clip
  • Housing: plastic, light grey
  • Dimensions: 67 x 50 x 38 mm
  • Operating temperature: 0 to +60 °C
  • Storage temperature: -20 to +80 °C
  • Protection: IP20

Notes: the operating range is 0 to +60 °C inside the enclosure; in very cold locations use it together with a cabinet heater. This is general-purpose industrial hardware; it is not approved for use inside classified (hazardous) areas and no certification documents are included.

Reviews

There are no reviews yet.

Be the first to review “EARU MFR012 DIN-Rail Mechanical Hygrostat, 40-90 % RH, Cabinet Heater / Fan Humidity Control Switch”

Your email address will not be published. Required fields are marked *