NUEVODiseña tu máquina gratis: lista completa de componentes en 2 minutos Empezar →Diseña tu máquina gratis → NEWDesign your machine for free: full component list in 2 minutes Start →Design your machine free →

KM8637 Photoelectric Liquid Leak Sensor – Water / Oil Detection, 1 mm, NO / NC or RS485, IP68 Stainless Steel

Price range: $126.99 through $133.99

Request a quote →

Buying several units, need a written quote for your PO, or shipping outside the US? Tell us the quantity and destination country and we reply by email with a written quote for KM8637 Photoelectric Liquid Leak Sensor – Water / Oil Detection, 1 mm, NO / NC or RS485, IP68 Stainless Steel.

Volume pricing (same item, per order line)
QtyDiscount
1list price
2–4up to -3%
5–9up to -6%
10–24up to -9%
25+Request a quote
Applied automatically in the cart.

Infrared photoelectric leak sensor that trips on about 1 mm of liquid — water, oil, acids or alkaline solutions, conductive or not. Choose a dry-contact style NO or NC switch output or RS485 (9600 baud default). Stainless steel housing with glass probe, IP68, M16 thread or bracket mount, 1 m cable.

🚚 Free shipping to US addresses · Estimated delivery: 8–21 business days after payment (tracking number by email).
Ships from our supplier's warehouse. International orders: shipping cost shown at checkout · Shipping policy
Request a quote / bulk pricing

Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.

SKU: ABX-AE-648651 Categories: ,
🛠️ ¿Necesitas la máquina completa?Diséñala gratis: elige tu máquina y recibe la lista de PLC, motores, sensores y seguridad. Diseñar gratis → 🛠️ Need the complete machine?Design it free: pick your machine and get the list of PLC, motors, sensors and safety parts. Design it free →
KM8637 Photoelectric Liquid Leak Sensor – Water / Oil Detection, 1 mm, NO / NC or RS485, IP68 Stainless Steel
Technical specification sheet · automationbotx.com
SKUABX-AE-648651
Manufacturer part numberKM8637
Output (options)Normally Open (NO) · Normally Closed (NC) · RS485 Modbus
Mounting (options)M16 threaded · Bracket
Liquidswater, ultra-pure water, oil, acids, alkaline solutions
Output optionsnormally open, normally closed or RS485 (default 9600 baud)
Low consumptionunder 12 mA
ModelKM8637
Sensing PrincipleInfrared photoelectric
Detection Height1 mm liquid
Detection Accuracy±2 mm
Response Time<1 s
Detectable LiquidsWater, oil, acid, alkaline solutions
OutputNO, NC or RS485 (options)
RS485 Baud Rate (default)9600
SupplyDC 9-28 V
Current Consumption<12 mA
Power Consumption<125 mW
Probe MaterialGlass
Housing MaterialStainless steel
ProtectionIP68
Operating Temperature-20~80 °C
Cable Length1 m
InstallationM16 threaded or bracket

Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.

Ask about this product

Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.

We use your email only to answer this question.

Description

Use it in sumps, secondary-containment areas, pump and compressor skid drip pans, generator rooms, MCC and telecom shelters to raise an alarm as soon as liquid appears. Because it senses optically instead of through conductivity, it also detects non-conductive liquids such as oil, which pin-type water sensors miss. Wire the NO/NC output to a PLC, RTU, alarm annunciator or beacon, or read the RS485 version from a Modbus master.

  • Infrared photoelectric detection (emitter and receiver), glass probe
  • Trips at about 1 mm of liquid; detection accuracy ±2 mm; response under 1 s
  • Liquids: water, ultra-pure water, oil, acids, alkaline solutions
  • Output options: normally open, normally closed or RS485 (default 9600 baud)
  • Low consumption: under 12 mA
  • Stainless steel housing, IP68; M16 threaded or bracket mounting; 1 m cable

Specifications (as listed by the supplier)

  • Model: KM8637
  • Sensing Principle: Infrared photoelectric
  • Detection Height: 1 mm liquid
  • Detection Accuracy: ±2 mm
  • Response Time: <1 s
  • Detectable Liquids: Water, oil, acid, alkaline solutions
  • Output: NO, NC or RS485 (options)
  • RS485 Baud Rate (default): 9600
  • Supply: DC 9-28 V
  • Current Consumption: <12 mA
  • Power Consumption: <125 mW
  • Probe Material: Glass
  • Housing Material: Stainless steel
  • Protection: IP68
  • Operating Temperature: -20~80 °C
  • Cable Length: 1 m
  • Installation: M16 threaded or bracket

Supply: the supplier lists 9-28 VDC in its parameter table (5-24 / 5-28 VDC elsewhere on the listing); a 12 or 24 VDC supply is within all of them. Note: general-purpose device for non-hazardous (unclassified) areas; no hazardous-area certification is included. Longer cables available on request through /wholesale/.

Additional information

Output

Normally Open (NO), Normally Closed (NC), RS485 Modbus

Mounting

M16 threaded, Bracket

Reviews

There are no reviews yet.

Be the first to review “KM8637 Photoelectric Liquid Leak Sensor – Water / Oil Detection, 1 mm, NO / NC or RS485, IP68 Stainless Steel”

Your email address will not be published. Required fields are marked *