Motorized Stainless Steel Ball Valve, 2-Way, 12/24 VDC, 3-Wire Open/Close, IP65, DN15-DN50
Price range: $93.99 through $193.99
Stainless steel 2-way motorized ball valve, 12 or 24 VDC, three-wire open/close control, 6 W only while moving, 1.6 MPa, IP65. DN15 to DN50, G (BSPP) female threads. For water and glycol lines.
Request a quote / bulk pricing
Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.
Technical specification sheet · automationbotx.com
| SKU | ABX-AE-411539 |
|---|---|
| Size (options) | DN15 · DN20 · DN25 · DN32 · DN40 · DN50 |
| Supply (options) | 12 VDC · 24 VDC |
| Typical uses | remote isolation of wash-down, cooling-water and make-up water lines; zoning of glycol heating loops in winter; automatic fill and drain driven by a PLC, RTU or level controller output. |
| Type | 2-way motorized ball valve |
| Body material | Stainless steel |
| Size | DN15, DN20, DN25, DN32, DN40, DN50 (options) |
| Connection | G internal thread (BSPP) |
| Supply | 12 VDC or 24 VDC (options) |
| Control | Three-wire, two-way (open/close) |
| Power | 6 W (only while opening or closing) |
| Running time | 5-15 s |
| Actuator torque | 6 N.m (DC versions) |
| Nominal pressure | 1.6 MPa |
| Max differential pressure | 1.0 MPa |
| Media temperature | 2-95 °C |
| Media | Cold/hot water, up to 60% ethylene glycol |
| Enclosure | IP65 |
| Package | 1 ball valve with actuator |
| Threads are G (BSPP), not NPT | use G-to-NPT adapters on US piping. |
Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.
Ask about this product
Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.
Description
Two-way motorized ball valve with a stainless steel body and an IP65 electric actuator for remote open/close of water and glycol lines. The actuator uses three-wire, two-way control (one wire to open, one to close, common) and draws power only while the valve is moving, which suits solar or battery-backed 12/24 VDC panels at well pads, tank batteries, compressor and generator skids.
Typical uses: remote isolation of wash-down, cooling-water and make-up water lines; zoning of glycol heating loops in winter; automatic fill and drain driven by a PLC, RTU or level controller output.
Specifications (as listed by the supplier)
- Type: 2-way motorized ball valve
- Body material: Stainless steel
- Size: DN15, DN20, DN25, DN32, DN40, DN50 (options)
- Connection: G internal thread (BSPP)
- Supply: 12 VDC or 24 VDC (options)
- Control: Three-wire, two-way (open/close)
- Power: 6 W (only while opening or closing)
- Running time: 5-15 s
- Actuator torque: 6 N.m (DC versions)
- Nominal pressure: 1.6 MPa
- Max differential pressure: 1.0 MPa
- Media temperature: 2-95 °C
- Media: Cold/hot water, up to 60% ethylene glycol
- Enclosure: IP65
- Package: 1 ball valve with actuator
Selection notes
- Threads are G (BSPP), not NPT: use G-to-NPT adapters on US piping.
- The supplier lists water and glycol as media. It is not specified for hydrocarbons, fuel gas or steam.
- No manual override is listed. On/off service only, not for modulating control.
- Not a safety shutdown valve. No third-party certification is included.
Additional information
| Size | DN15, DN20, DN25, DN32, DN40, DN50 |
|---|---|
| Supply | 12 VDC, 24 VDC |









Reviews
There are no reviews yet.