NUEVODiseña tu máquina gratis: lista completa de componentes en 2 minutos Empezar →Diseña tu máquina gratis → NEWDesign your machine for free: full component list in 2 minutes Start →Design your machine free →

SONGGER QT-10H2 Hydrogen (H2) Gas Transmitter, 0-1000 ppm | 4-20 mA, 0-10 V or RS485 Modbus, 10-30 VDC, IP65

$200.99

Wall-mount hydrogen gas transmitter for battery rooms and UPS enclosures. 0-1000 ppm, 1 ppm resolution, ±5% FS, output 4-20 mA, 0-10 V or RS485 Modbus, 10-30 VDC, IP65, as listed by the supplier.

Request a quote / bulk pricing

Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.

SKU: ABX-AE-560125 Categories: ,
🛠️ ¿Necesitas la máquina completa?Diséñala gratis: elige tu máquina y recibe la lista de PLC, motores, sensores y seguridad. Diseñar gratis → 🛠️ Need the complete machine?Design it free: pick your machine and get the list of PLC, motors, sensors and safety parts. Design it free →
SONGGER QT-10H2 Hydrogen (H2) Gas Transmitter, 0-1000 ppm | 4-20 mA, 0-10 V or RS485 Modbus, 10-30 VDC, IP65
Technical specification sheet · automationbotx.com
SKUABX-AE-560125
Manufacturer part numberQT-10H2
Output (options)4-20 mA · 0-10 V · RS485
Range (options)0-1000 ppm
Choose the output for your input card4-20 mA, 0-10 V or RS485 (Modbus address 1-255, baud rate 1200-115200).
BrandSONGGER
ModelQT-10H2
GasHydrogen (H2)
Range0-1000 ppm
Output4-20 mA, 0-10 V or RS485
Supply10-30 VDC
Power consumption0.12-0.9 W
Accuracy±5% FS
Resolution1 ppm
StabilityUnder 2% of signal per month
Response time70 s or less (1000 ppm)
Preheating time5 min or more
Operating temperature-20 to 50 °C
Operating humidity15-90% RH non-condensing
Pressure range90-110 kPa
HousingIP65, wall mount, no display
Dimensions110 × 85 × 44 mm
Hydrogen is lighter than airthe supplier does not give a mounting height, so follow your site's gas-detection layout (usually high on the wall or near the ceiling above the batteries).

Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.

Ask about this product

Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.

We use your email only to answer this question.

Description

The SONGGER QT-10H2 is a wall-mount hydrogen (H2) gas transmitter with a built-in probe in an IP65 housing. It gives a PLC, RTU or data logger a continuous H2 reading in ppm for rooms where hydrogen can collect: battery rooms and UPS enclosures with lead-acid banks at compressor stations, control buildings and telecom shelters, and chemical or electrolysis areas.

Key points

  • Range 0-1000 ppm with 1 ppm resolution and ±5% FS accuracy, as listed by the supplier.
  • Choose the output for your input card: 4-20 mA, 0-10 V or RS485 (Modbus address 1-255, baud rate 1200-115200).
  • Wide 10-30 VDC supply and 0.12-0.9 W consumption, suitable for 24 VDC panels and solar-powered RTUs.
  • IP65 waterproof, dustproof and anti-corrosion housing, 110 × 85 × 44 mm.
  • Response time 70 s or less at 1000 ppm; preheat 5 minutes or more after power-up.

Specifications (as listed by the supplier)

  • Brand: SONGGER
  • Model: QT-10H2
  • Gas: Hydrogen (H2)
  • Range: 0-1000 ppm
  • Output: 4-20 mA, 0-10 V or RS485
  • Supply: 10-30 VDC
  • Power consumption: 0.12-0.9 W
  • Accuracy: ±5% FS
  • Resolution: 1 ppm
  • Stability: Under 2% of signal per month
  • Response time: 70 s or less (1000 ppm)
  • Preheating time: 5 min or more
  • Operating temperature: -20 to 50 °C
  • Operating humidity: 15-90% RH non-condensing
  • Pressure range: 90-110 kPa
  • Housing: IP65, wall mount, no display
  • Dimensions: 110 × 85 × 44 mm

Before you order

  • This listing is the standard wall-mount model with a built-in probe and no display. The output is chosen in the selector.
  • Hydrogen is lighter than air: the supplier does not give a mounting height, so follow your site’s gas-detection layout (usually high on the wall or near the ceiling above the batteries).
  • Not rated for hazardous (classified) areas: mount it outside classified zones or follow your site rules. No third-party certification is included.
  • It is a monitoring input, not a certified life-safety gas detector. Use your PLC or a relay to trigger ventilation or an alarm if needed.
  • To log and trend the reading remotely in read-only mode, see AutomationBotX Cloud (free up to 10 machines).

Additional information

Output

4-20 mA, 0-10 V, RS485

Range

0-1000 ppm

Reviews

There are no reviews yet.

Be the first to review “SONGGER QT-10H2 Hydrogen (H2) Gas Transmitter, 0-1000 ppm | 4-20 mA, 0-10 V or RS485 Modbus, 10-30 VDC, IP65”

Your email address will not be published. Required fields are marked *