Veinasa TD-40 Dew Point Transmitter, -40 to +40 °Ctd, 4-20 mA, 50 bar, Stainless IP65
$362.99
Stainless dew point transmitter for instrument air and dry gases: -40 to +40 °Ctd, ±2 °Ctd, 4-20 mA (3-wire), up to 50 bar, IP65, as listed by the supplier.
Ships from our supplier's warehouse. International orders: shipping cost shown at checkout · Shipping policy
- ✓ Free tracked shipping in the USEnvío gratis con seguimiento en EE. UU.
- ✓ Secure checkout: PayPal or cardPago seguro: PayPal o tarjeta
- ✓ Buying in volume?¿Compras por volumen? Request a written quote →Pide una cotización por escrito →
Request a quote / bulk pricing
Buying for a business or need several units? Send us the quantity and destination and we will reply with a quote.
Technical specification sheet · automationbotx.com
| SKU | ABX-AE-829991 |
|---|---|
| Manufacturer part number | TD-40 |
| Response | about 40 s from -40 to -20 °Ctd and about 5 min from -20 to +40 °Ctd, per the supplier table. |
| Brand | Veinasa |
| Model | TD-40 (4-20 mA) |
| Measured value | Dew point (°Ctd) |
| Range | -40 to +40 °Ctd (standard) |
| Accuracy | ±2 °Ctd (air or nitrogen) |
| Output | 4-20 mA, 3-wire |
| Output resolution | 0.002 mA |
| Output temperature drift | 0.01% of span/°C |
| Output load | 500 Ω max |
| Supply | DC 18-28 V (wiring diagram); table lists 8-28 V, 30 mA |
| Operating temperature | -40 to 60 °C |
| Storage temperature | -40 to 60 °C |
| Ambient humidity | 0-95% RH |
| Sample gas flow | above 1 L/min |
| Pressure | 0-50 bar |
| Housing | Stainless steel |
| Protection | IP65 |
| Sensor | Polymer thin-film |
| Connection | 5-pin connector with cable |
| Gray | power supply + |
| Mixed color | power supply - |
| Blue | 4-20 mA output |
Data as published in this listing by the manufacturer or supplier. Price, stock and shipping are shown above.
Ask about this product
Compatibility, wiring, a value that is missing? Send your question and we reply by email. Prefer to call? +1 346 283 9580.
Description
The Veinasa TD-40 is a stainless-steel dew point transmitter with a polymer thin-film sensor and a 4-20 mA output. It gives a PLC, RTU or data logger a continuous dew point reading for instrument air, nitrogen and other dry industrial gases: checking that the instrument-air dryer at a compressor station or gas plant is doing its job, so moisture does not freeze in pneumatic actuators, positioners and control valves during winter.
Key points
- Standard dew point range -40 to +40 °Ctd with ±2 °Ctd accuracy (air or nitrogen), as listed by the supplier.
- 4-20 mA current output (3-wire), 0.002 mA resolution, load up to 500 Ω.
- Rated for line pressure up to 50 bar; sample gas flow above 1 L/min.
- Stainless-steel housing with sintered filter, IP65. Install directly in the pipe or in a sampling block (the supplier shows an ISO G1/2″ connection between transmitter and sampler).
- Response: about 40 s from -40 to -20 °Ctd and about 5 min from -20 to +40 °Ctd, per the supplier table.
This is a monitoring instrument. The supplier does not list any hazardous-area approval; do not install it in a classified area. The sampler block and bracket shown in the supplier drawings are not listed as included.
Specifications (as listed by the supplier)
- Brand: Veinasa
- Model: TD-40 (4-20 mA)
- Measured value: Dew point (°Ctd)
- Range: -40 to +40 °Ctd (standard)
- Accuracy: ±2 °Ctd (air or nitrogen)
- Output: 4-20 mA, 3-wire
- Output resolution: 0.002 mA
- Output temperature drift: 0.01% of span/°C
- Output load: 500 Ω max
- Supply: DC 18-28 V (wiring diagram); table lists 8-28 V, 30 mA
- Operating temperature: -40 to 60 °C
- Storage temperature: -40 to 60 °C
- Ambient humidity: 0-95% RH
- Sample gas flow: above 1 L/min
- Pressure: 0-50 bar
- Housing: Stainless steel
- Protection: IP65
- Sensor: Polymer thin-film
- Connection: 5-pin connector with cable
Wiring (supplier diagram)
- Gray: power supply +
- Mixed color: power supply –
- Blue: 4-20 mA output
Need a quote for several units or a different range? Use our wholesale quote form.









Reviews
There are no reviews yet.