YE-60 Diaphragm Pressure Gauge – 60 mm, 0-6 to 0-60 kPa, Low-Pressure Gas, 1/4″ or 1/2″ NPT

Description

A 60 mm diaphragm (capsule-type) pressure gauge for reading low gas pressures in the kilopascal range. It is intended for natural-gas service lines, gas trains ahead of burners, ventilation ducts and other low-pressure air or gas systems where a standard Bourdon-tube gauge is too coarse to show the reading clearly.

Choosing a version

• Range: six full-scale ranges from 0-6 kPa (about 0.87 psi) to 0-60 kPa (about 8.7 psi). Pick a range so the normal working pressure sits in the middle third of the dial.
• Connection: 1/4″ NPT or 1/2″ NPT male brass thread, radial (bottom) mount.

The supplier describes the gauge as an overpressure-protected design. Other dial sizes (75 mm / 100 mm) and other threads are mentioned by the supplier as options but are not offered here.

Specifications (as listed by the supplier)

• Model: YE-60
• Gauge type: Diaphragm (capsule) pressure gauge
• Dial diameter: 60 mm
• Measuring range: 0-6 to 0-60 kPa (by version)
• Accuracy class: 2.5
• Mounting: Radial (bottom connection)
• Connection: Brass, 1/4″ or 1/2″ NPT male
• Case material: Nickel-plated iron
• Operating temperature: -25 to 55 °C
• Typical media: Natural gas, air

Typical uses: natural-gas pipelines and meter sets, burner gas trains, ventilation and air-handling systems, low-pressure gas distribution.